Echo SRM-2400SB User Manual download pdf (Page 8)

NOTE

Earlier model Power Heads may have shorter couplings. Short

couplings t ush to decal point (E). New couplings are 4-3/4 in.

long, and t ush to line (C).

NOTE

Lower bearing housing and head assembly must be in line with

the engine.

6. Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft

hole. Insure locator pin is fully engaged by twisting lower drive

shaft. Locator pin should snap ush in coupler. Full engagement will

prevent further shaft rotation.

7. Secure lower shaft assembly to coupler by tightening clamping

knob (D).

operaTIon

WARNING

Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from all

openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete

stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service.

Operating Techniques

1. Before edging, water the area to soften the ground to make edging

easier.

2 Before edging, check the area and remove all obstacles and ob-

jects that could be thrown.

3. Plan to edge regularly to make it easier to keep a neat edge and to

avoid having to make more than one pass.

NOTE

Blade depth may have to be adjusted due to differences in height

between the hard surface and the top of the grass.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Echo SRM-2400SB User Manual Page 8