Echo SRM-2400SB User Manual download pdf (Page 7)

Power edger AttAchment

oPerAtor's mAnuAl

ConTenTs

The ECHO product you purchased has been factory pre-assembled for your convenience.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing

parts. Use the contents list to check for missing parts.

___ 1 - Power Edger Attachment

___ 1 - Operators Manual

___ 1 - Warranty Registration Card

___ 2 - Split Pins

___ 1 - Storage Hook Assembly

___ Assembly Tool (s)

1. BLADE - Rotates to provide cutting action.

2. DEBRIS SHIELD/FLAP - Mounted over the cutting attachment. Helps protect operator by deecting debris

produced during the edging operation.

3. DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the exible drive shaft.

4. WHEEL - Adjustable up/down, sets depth of blade.

assembly

Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling.

1. Set Power Head/Shaft Assembly on a level surface.

2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to

lock-out position.

3. Remove vinyl cap from attachment drive shaft.

4. Remove cardboard spacer, if necessary.

5. Carefully t attachment drive shaft assembly into coupler (B) to de-

cal assembly line (C), making sure that the inner lower drive shaft

engages into the square upper drive shaft socket.

power head shafT/lower shafT assembly

WARNING

Do not perform maintenance or assembly procedures with engine running.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Echo SRM-2400SB User Manual Page 7