Echo CS-680 User Manual download pdf (Page 17)

CS-680

WHEN THE ENGINE IS COLD

CAUTION

Make sure the bar and chain are free from

any obstruction when starting the chain saw.

• Move chain brake lever fully forward to lock chain

brake before starting.

• Fill the fuel tank with fuel mixture.

It is not permitted to fill fuel above the shoulder

level of fuel tank.

• Fill the chain oil tank with lubricant.

Do not over fill.

• Move ignition switch to “RUN” position.

• Pull choke control knob all the way out. (Choke

position)

• Securely hold the chain saw as shown and pull

starter handle several times until first firing

sound.

• Push choke control knob all the way in.

• Pull starter handle to start the engine.

• When engine starts, immediately squeeze

throttle trigger, to release throttle latch, and pull

front hand guard towards the operator

immediately. (Chain brake unlocked position)

WHEN THE ENGINE IS WARM

CAUTION

Make sure the bar and chain are free from

any obstruction when starting the chain saw.

• Move chain brake lever fully forward to lock chain

brake before starting.

• Confirm there is fuel and chain oil in the tanks.

• Move ignition switch to “RUN” position.

• Securely hold the chain saw as shown and pull

starter handle.

• Choke may be used if necessary, but after first

firing sound, pull throttle trigger to release choke.

• After starting the engine, pull front hand guard

towards the operator immediately. (Chain brake

unlocked position)

Starter handle

Ignition switch

Start / Run

Open

Ignition switch

Choke

Start / Run

Throttle trigger

lockout

Throttle trigger

Throttle trigger lockout

Throttle trigger

Chain brake

Unlock chain brake

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comments to this Manuals

No comments

Echo CS-680 User Manual Page 17

Comments to this Manuals

Related products and manuals for Petrol tool Echo CS-680