Echo CS-680 User Manual download pdf (Page 16)

CS-680

CHAIN LUBRICANT

Proper lubrication of the chain while in operation

reduces the friction between the chain and the

guide bar to a minimum and assures a longer

service life.

• Use bar and chain oil of high quality for this

purpose.

• Do not use used or reclaimed oil to avoid various

oiler problems.

• Use ECHO bar and chain oil.

• When ECHO bar and chain oil is not available:

Use motor oil, etc.

• Use bar and chain oil of the following grades:

SAE No. 30 .......in summer

SAE No. 10 .......in winter or when cutting

resinous trees.

• When refueling, also refill chain oil.

OPERATION

WARNING

• After choke control knob is pulled and then

knob is returned to original position,

throttle remains a little open (latch

condition).

• If engine is started in this latch condition,

chain starts to turn. Do not start engine

before chain brake is locked.

CAUTION

• After starting the engine, squeeze throttle

trigger slightly to release throttle latch and

pull front hand guard towards the operator

immediately.

(Chain brake unlocked position)

• Never use throttle latch for cutting.

• Use the chain brake only in starting or in

emergencies.

Oil tank capFuel tank cap

Cap indication

Fuel/oil tanks are indicated by the following

illustrations on the caps.

Starter handle

Ignition switch

Choke

Start / Run

Throttle trigger

lockout

Throttle trigger

Unlock chain brake

Chain brake

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments

Echo CS-680 User Manual Page 16

Comments to this Manuals

Related products and manuals for Petrol tool Echo CS-680