Echo SHC-265 User Manual download pdf (Page 20)

IMPORTANT

DO NOT use a metal scraper to remove dirt from the cylinder ns.

5. Use brush to remove dirt from the cylinder ns.

6. Remove grass and leaves from the grid between the recoil starter

and fuel tank.

7. Assemble components in reverse order.

e X h a u s t s y s t e m

Spark Arrestor Screen

Level 2.

Tools Required: Cross Head Screwdriver, 4mm Hex Wrench, Soft

Metal Brush

Parts Required: Spark Arrestor Screen, Gasket

1. Remove spark plug lead.

2. Remove mufer cover screw and mufer cover (A).

3. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from

entering cylinder.

4. Remove spark arrestor screen (D), gasket (C) and exhaust guide

(B) from mufer body.

5. Clean carbon deposits from mufer components.

NOTE

When cleaning carbon deposits, be careful not to damage the cata-

lytic element inside mufer.

6. Replace screen if it is cracked, plugged or has holes burned

through.

7. Assemble components in reverse order.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

No comments

Echo SHC-265 User Manual Page 20