Echo CS-352 User Manual download pdf (Page 27)

CS-352

GUIDE BAR

• Clean before using.

• Clean the groove of the guide bar with a small screw-

driver.

• Clean oil holes with a wire.

• Reverse guide bar periodically.

• Check sprocket and the clutch and clean the bar

mount area before installation of the bar.

Replace either or both if worn.

SPROCKET

• A damaged sprocket will cause premature damage or

wear of saw chain.

• When the sprocket has worn out 0.5 mm (0.02 in.) or

more, replace it.

• Check sprocket when you install new chain. Replace it

if worn.

CYLINDER FINS

• Check periodically.

• Clogged ns will result in poor engine cooling.

• Remove dirt and dust from between ns to let cooling

air pass easily.

MUFFLER SPARK ARRESTOR

• Remove cylinder cover and remove spark plug lead.

• Remove spark arrestor screen cover and screen from

mufer body.

• Clean carbon deposits from mufer components.

• Replace screen if it is cracked, or has holes burned

through.

• Assemble components in reverse order.

NOTE

Carbon deposits in mufer will cause drop in engine

output. Spark arrestor screen must be checked

periodically.

Worn : 0.5 mm (0.02 in.)

Groove

Oil hole

Cylinder ns

Spark arrestor screen

Mufer

Screen cover

Sprocket

Oil lter

Oil tank cap

OIL FILTER

• Check periodically.

• Do not allow dust to enter into oil tank.

• A clogged oil lter will affect the normal lubricating

system.

• Pull it out through oil lling hole with a piece of steel

wire or the like.

• If the lter is dirty, wash it in gasoline or replace it.

• When the inside of the tank gets dirty, rinsing the

tank out with gasoline can clean it.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Comments to this Manuals

No comments

Echo CS-352 User Manual Page 27

Comments to this Manuals

Related products and manuals for Petrol tool Echo CS-352