Echo CS-352 User Manual download pdf (Page 12)

CS-352

DESCRIPTION OF PARTS

1. Instruction manual - Included with unit. Read

before operation and keep for future reference to

learn proper, safe operating techniques.

2. Safety manual - Describe operating and safety

instructions for this chain saw.

3. Chain Brake Lever/Front Hand Guard -Locks

and unlocks the chain brake to stop or allow saw

chain rotation. Guard between the front handle

and the saw chain helps protect the hand from

injuries if the hand slips off the handle.

4. Bar tip guard - Anti-kickback device attached on

the bar nose.

5. Saw chain - Chain, serving as a cutting tool.

6. Guide bar - The part that supports and guides the

saw chain.

7. Chain catcher - A projection designed to reduce

the risk of the operator’s right hand from being hit

by a chain which has broken or derailed from the

guide bar during cutting.

8. Chain tension adjuster - Device to adjust chain

tension.

9. Chain Brake/Clutch cover - Protective cover for

the chain brake, guide bar, saw chain, clutch, and

sprocket when the chain saw is in use.

10. Rear hand guard - Extension on the lower part of

the rear handle for protecting the hand from the

chain if it breaks or degrooves.

11. Purge pump - When starting engine, push purge

pump 3 or 4 times.

12. Choke control knob - Device for enriching the

fuel/air mixture in the carburetor to aid cold start-

ing. Also activates fast idle throttle latch.

13. Cylinder cover - The cooling airow grill. It covers

the cylinder, air lter, spark plug and silencer.

14. Throttle trigger lockout - A safety lever which

must be depressed before the throttle trigger can

be activated. Prevents accidental operation of

the throttle trigger.

15. Rear handle (for the right hand) - Support han-

dle located towards the rear of the engine hous-

ing.

16. Throttle trigger - Device activated by the opera-

tor’s nger, for controlling the engine speed. Also

releases fast idle throttle latch when squeezed

and released immediately after starting engine.

17. Ignition switch - Device for connecting and dis-

connecting the ignition system and thus allowing

the engine to be started or stopped.

18. Fuel tank cap - For closing the fuel tank.

19. Cylinder cover latch - Secures cylinder cover.

20. Starter handle - Pull handle slowly until starter

engages then quickly and rmly. When engine

starts, return handle slowly. DO NOT let handle

snap back or damage to unit will occur.

21. Front handle (for the left hand) - Support handle

located at the front of the engine housing.

22. Oil tank cap - For closing the oil tank.

CHAIN SAW TERMS

1. Fast Idle - Throttle setting that causes engine to

operate at a faster speed for easier starting.

2. Throttle Latch - Device that sets idle speed to fast

idle when choke control is operated.

3. Chain Brake - Stops the saw chain.

4. Drive Sprocket - Drives saw chain.

5. Clutch - Turns drive sprocket when engine rpm is

fast enough to provide the power needed for cutting.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments

Echo CS-352 User Manual Page 12

Comments to this Manuals

Related products and manuals for Petrol tool Echo CS-352