Echo HCA-265 User Manual download pdf (Page 18)

a I r f I l t e r

Level 1.

Tools required: 25 - 50 mm (1 - 2 in.) Cleaning Brush

Parts required: REPOWER

AIR & FUEL FILTER KIT.

1. Close choke (Cold Start Position [ ]). This prevents dirt from

entering the carburetor throat when the air lter is removed. Brush

accumulated dirt from air cleaner area.

2. Remove air lter cover. Brush dirt from inside cover.

3. Remove air lter and lightly brush debris from lter. Replace lter

if it is damaged, fuel soaked, very dirty, or the rubber sealing edges

are deformed.

4. If lter can be reused, be certain it:

• Fits tightly in the air lter cavity.

• Is installed with the original side out.

5. Install air lter cover.

f u e l f I l t e r

Level 1.

Tools required: 200 - 250 mm (8 - 10 in.) length of wire with one

end bent into a hook, clean rag, funnel, and an

approved fuel container

Parts required: REPOWER

AIR & FUEL FILTER KIT.

DANGER

Fuel is VERY ammable. Use extreme care when mixing, storing

or handling, or serious personal injury may result.

1. Use a clean rag to remove loose dirt from around fuel cap and

empty fuel tank.

2. Use the “fuel line hook” to pull the fuel line and lter from the

tank.

3. Remove the lter from the line and install the new lter.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Echo HCA-265 User Manual Page 18