Echo HCA-265 User Manual download pdf (Page 14)

r o t a t e c u t t e r a s s e m b l y

Always use the unit from the right-hand side of your body – NEVER

from the left side. Rotate cutter assembly 180 degrees on driveshaft in

order to avoid cutting directly above your head, and to avoid contact

with hot mufer.

1. Loosen gearcase clamping screw (A), hand guard clamping screw

(B), and remove gearcase locating screw (C).

2. Rotate cutter assembly 180-degrees on driveshaft until locating

hole in driveshaft is visible through locating hole in gearcase.

3. Install gearcase locating screw (C), and securely tighten all hard-

ware.

WARNING

Hedge Clipper blades are very sharp. Wear gloves to protect hands

when rotating cutter assembly or serious personal injury may

result.

WARNING

During operation, the complete unit, especially the drive shaft

housing and gearcase may become too hot to touch. Avoid contact

when rotating cutter assembly.

s t a r t I n g c o l d e n g I n e

NOTE

The blade cover is used for transportation and storage. Remove

blade cover before using the unit.

WARNING

The attachment will operate immediately when the engine starts

and could result in loss of control and possible serious injury. Keep

movable parts of the attachment off the ground and away from

objects that could become entangled or thrown.

1. Stop Switch

Move stop switch button (A) forward away from the STOP

position.

2. Close Choke

Move choke lever (B) to Cold Start (

) Position.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Echo HCA-265 User Manual Page 14