Echo CH611DH Instruction v.2 User Manual download pdf

Instruction Sheet

Instructions

PN 75979-00

Rev.021408

SUBJECT: SNUBBERS WITH

RELAY, KIT # 75983-00

FITS MODELS: 6" CHIPPERS

(CH6670H, CH611DH, CH6993H)

AND 8" TURNTABLE CHIPPERS

(CH8670H, CH8993H)

Before inspecting or servicing any part of this machine,

shut off power source, remove key, disconnect the

battery cables and make sure all moving parts have

come to a complete stop.

WARNING

These instructions describe how to install two

snubber harnesses and a new relay. The relay comes

preprogrammed for the specific model on which it will be

installed.

1. INSTALL SNUBBER HARNESSES

1.1 Locate snubber harnesses in kit (see below).

For 6” chippers: To locate the valve assembly, open the

engine hood. The valve assembly is under the gauge panel

in the engine compartment (see below).

For 8” chippers: To locate the valve assembly, open the

belt cover. The valve assembly is located to the right of

the belt (see below).

1.2 Unplug the connectors on the valve assembly (shown

with arrows below).

1.3 Plug the snubber harnesses into the valve assembly,

and then plug the connectors removed in step 1.2 into the

other end of the snubbers, taking care to replace connectors

into the same side as which they were removed.

1 2

Instruction SheetInstructionsPN 75979-00Rev.021408SUBJECT: SNUBBERS WITH RELAY, KIT # 75983-00FITS MODELS: 6" CHIPPERS (CH6670H, CH611DH, CH

KIT NO. 75983-00, SNUBBERS WITH RELAYPART NO. DESCRIPTION QTY18496-00 RELAY, PROGRAMMABLE 136250-00 SNUBBER HARNESS 22. INSTALL NEW SMARTRELAY2.1 R

No comments

Echo CH611DH Instruction v.2 User Manual