Echo SHC-260 User Manual download pdf (Page 19)

SHAFT HEDGE CLIPPER

OPERATOR'S MANUAL

AIR FILTER

Level 1

Tools required: 25 or 50 mm (1 or 2 in.) Cleaning brush

Parts required: 90030 REPOWER

Air & Fuel Filter Kit

1. Close choke (Cold Start Position [ ]). This prevents dirt from

entering the carburetor throat when the air filter is removed.

Brush accumulated dirt from the air cleaner area.

2. Remove the air cleaner cover. Clean and inspect the element for

damage. If element is fuel soaked and very dirty, replace.

3. If element can be cleaned and reused, be certain it:

• still fits the cavity in the air cleaner cover.

• is installed with the original side out.

NOTE

Carburetor adjustment may be needed after air filter cleaning or

replacement. See Carburetor Adjustment Section.

FUEL FILTER

Level 1

Tools required: 200-250 mm (8-10 in.) length of wire with one end bent

into a hook, clean rag, funnel, and an approved fuel

container.

Parts required: 90030 REPOWER

Air & Fuel Filter Kit

WARNING DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or

handling.

1. Use a clean rag to remove loose dirt from around fuel cap and

empty fuel tank.

2. Use the “fuel line hook” to pull the fuel line and filter from the

tank.

3. Remove the filter from the line and install the new filter.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Echo SHC-260 User Manual Page 19