Echo PPT-265S User Manual download pdf (Page 22)

a I r f I l t e r

Level 1.

Tools required: Cleaning brush 25 or 50 mm (1 or 2 in.)

Parts required: Air Filter

1. Close choke (Cold Start Position [ ]). This prevents dirt from

entering the carburetor throat when the air lter is removed. Brush

accumulated dirt from air cleaner area.

2. Remove air lter cover. Brush dirt from inside cover.

3. Remove air lter and lightly brush debris from lter. Replace lter

if it is damaged, fuel soaked, very dirty, or the rubber sealing edges

are deformed.

4. If lter can be reused, be certain it:

• Fits tightly in the air lter cavity.

• Is installed with the original side out.

5. Install air lter cover.

NOTE

Carburetor adjustment may be needed after air lter cleaning/re-

placement. See Carburetor Adjustment Section.

f u e l f I l t e r

Level 1.

Tools required: 200-250 mm (8 - 10 in.) length of wire with one end

bent into a hook, Clean rag, funnel, and an approved

fuel container

Parts Required: Fuel Filter

DANGER

Fuel is VERY ammable. Use extreme care when mixing, storing

or handling or serious personal injury may result.

1. Use a clean rag to remove loose dirt from around fuel cap and

empty fuel tank.

2. Use the “fuel line hook” to pull the fuel line and lter from the

tank.

3. Remove the lter from the line and install the new lter.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Echo PPT-265S User Manual Page 22