Echo CS-303T User Manual download pdf (Page 15)

CS-303T DESCRIPTION

X7503207802 15

Preparation For Use

Saw chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury

may result.

Note: The machine may be delivered with guide bar, tip guard, and

saw chain separated. Install guide bar, tip guard, and saw

chain as follows.

Tip Guard to Bar Instructions

Tools Needed: Two 11 mm (7/16 in.) Wrenches. For saws with tip

guard P/N 2894901 and Symmetrical or Asymmetrical

Low-Kick type (Double Guard) guide bars.

1. Install bolt (A) in rear hole (B) of tip guard and through front

hole (C) in guide bar.

2. IMPORTANT: Dimple (D) in tip guard must engage recess (E)

in guide bar.

3. Securely tighten nut (F) and bolt (A).

Guide Bar and Saw Chain Installation/Removal

1. Release the cylinder cover latches, and remove the cylinder

cover.

2. Remove spark plug lead.

3. Remove sprocket guard nuts (A) and remove sprocket guard

(B).

4. Remove guide bar and saw chain if necessary.

Note: See “Maintenance and Care” section for guide bar/saw chain

maintenance procedures.

For more information

scan this QR code.

For more information

scan this QR code.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

No comments

Echo CS-303T User Manual Page 15