Echo SB User Manual download pdf (Page 24)

The cutting head/work attachment (nylon line head,

blade, or PAS/SB attachment) must not move at idle,

otherwise serious personal injury may result. Periodic

carburetor adjustment may be necessary to assure the

cutting head/PAS attachment does not move at idle. If

the cutting head/work attachment moves at idle, re-

adjust carburetor according to “Carburetor Adjustment”

instructions and idle speed specifications provided in

your Operator’s Manual. See your Echo dealer or

contact Echo Consumer Support at 1-800-432-ECHO.

for help if you have any questions.

Follow these important safety rules when starting your

unit:

• DO NOT use unit if cutting head/work attachment

moves while engine is idling (throttle trigger not

depressed). Adjust idle speed as instructed in your

unit’s Operator’s Manual before using unit.

• NEVER start or run your unit indoors or anywhere

else where there is poor air circulation. Indoor

operation produces dangerous levels of Carbon

Monoxide, a colorless and odorless poisonous gas.

Carbon Monoxide (CO) causes nausea and other

flu-like symptoms if breathed. Prolonged exposure

to CO may cause loss of consciousness, brain

damage, or death.

• NEVER start a unit near a gasoline container or

spilled gasoline.

• ALWAYS move at least 3 m (10 ft.) away from

refueling location before starting engine.

• If a protective blade cover is used, ALWAYS re-

move blade cover before starting unit. Keep blade

cover nearby, and place cover back on blade when

unit is off and blade has stopped.

• NEVER start a PAS/HCA (extended shaft, articulat-

ing blade) unit while blade is in folded/locked posi-

tion. Make cutting angle adjustment first.

STARTING

Do not operate indoors

Do not start within 3 m (10 ft.) of

fueling location

3 m

(10 ft.)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

No comments

Echo SB User Manual Page 24