Echo HC-235 User Manual download pdf (Page 13)

Hedge Clipper

OperatOr's Manual

sToppING eNGINe

1. Throttle

Release throttle and allow engine to return to idle before shutting off

engine.

2. Stop Switch

Move stop switch (A) to STOP position.

WARNING

If engine does not stop when stop switch is moved to STOP posi-

tion, close choke - COLD START position - to stall engine. Have

your ECHO dealer repair stop switch before using hedge clipper

again.

sTARTING WARm eNGINe

The starting procedure is the same as Cold Start except DO NOT close

the choke.

WARNING

The blades must not move at idle, otherwise serious personal injury

may result. Periodic carburetor adjustment may be necessary to as-

sure blades do not move at idle.

If blades move, readjust carburetor according to “Carburetor Ad-

justment” instructions in this manual or see your ECHO Dealer.

1. Stop Switch

Move stop switch (A) away from the STOP position.

2. Purge Bulb

Pump purge bulb (C) until fuel is visible and ows freely in the

clear fuel tank return line. Pump bulb an additional 4 or 5 times.

3. Recoil Starter

Place the unit on a at, clear area. Grip the support handle securely

with right hand, and pull the recoil starter handle (D) with left hand

until engine res.

NOTE

If engine does not start after 5 pulls, use Cold Start Procedure.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Echo HC-235 User Manual Page 13