Echo GT-251E User Manual download pdf (Page 6)

EMISSION CONTROL

EPA Phase 2

The emission control system for this engine is EM (Engine Modification).

Emission Control Label located on Engine (EXAMPLE ONLY, information on label varies by FAMILY).

IMPORTANT ENGINE INFORMATION

ENGINE FAMILY: 5EHXS.0254ED DISPLACEMENT: 25.4 CC

EMISSION COMPLIANCE PERIOD : 300 HRS.

THIS ENGINE MEETS U.S. EPA PHASE 2 EMISSION REGULATIONS

FOR SMALL NONROAD ENGINES. REFER TO OWNER'S MANUAL

FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

PRODUCT EMISSION DURABILITY

The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the

engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures

are followed as listed in the Maintenance Section of this manual.

EQUIPMENT

• Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.

• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.

• Inspect shield for damage and ensure that the cut-off knife is securely in place. Replace if either is damaged or

missing.

• Check that the cutting attachment is firmly attached and in safe operating condition.

• Check that front (loop) handle and optional shoulder/waist harness are adjusted for safe, comfortable operation. See

Assembly for proper adjustment.

• Have repairs done only by an authorized ECHO Service Dealer.

WARNING DANGER

Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combi-

nation. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have

not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety

manual.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Echo GT-251E User Manual Page 6