Echo 99944200553 User Manual download pdf (Page 11)

99944200553 ASSEMBLY

X7702093405 11

ASSEMBLY

ProSweep Gear Housing Assembly to Lower Drive Shaft Assembly

Do not perform maintenance or assembly procedures with engine running.

1. Remove vinyl caps from attachment drive shaft.

2. Place brush gear housing assembly on a flat surface with

gear housing shaft mount at 45° angle.

3. Remove gear housing locator screw (A) with 4 mm hex

wrench.

4. Loosen gear housing mounting bolt (B) with 5 mm hex

wrench.

5. Position lower drive shaft (end without serial number decal)

into gear housing shaft mount.

6. Align hole in drive shaft housing with gear housing shaft

hole (C) and seat lower drive shaft end into gear housing

shaft mount. Install and tighten locator screw (A).

7. Tighten gear housing mounting bolt (B).

Power Head Shaft/Lower Shaft Assembly

1. Turn gear housing assembly over so that gear housing

mounting bolt (E) faces upward.

2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn

to lock-out position.

Thrown objects hazard. Install lower drive shaft so that

gear housing mounting bolt (E) faces upwards. Otherwise

debris will be thrown toward user.

Parts Required: ProSweep Gear Housing, Lower Drive Shaft

Assembly, PAS or SRM-SB Power Head

w/Shaft & Coupling

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Echo 99944200553 User Manual Page 11